Favelle Favco FAVCO 30T
Telescope crawler crane

Techical information
Dimensions
Capacities
Extra information
Photos

Download

Productpage
Telescopic cranes
Other Favelle Favco

 General information   Standard equipment   Optional equipment   Back to top 

Boom
28 ft. - 92 ft. (8.53 m – 28.04 m) 4 section telescoping type, extended and retracted proportionally by double-acting hydraulic cylinder and cable crowd system.
Maximum Tip Height: 98 ft. (29.87 m)

Boom Point
Four high-density nylon sheaves mounted in heavy-duty roller bearings.  Two removable pin-type rope guards.

Boom Elevation
Double-acting hydraulic cylinder.  Working range from 9º below to 80.6º above horizontal is achievable in 45 seconds at maximum operating speeds.

Wire Rope
420 ft. (128 m) of 9/16 in. (14,3 mm) diameter rotation resistant wire rope supplied with standard unit [9/16 in.      6 x 25 EIPS IWRC optional].

Main Load Block
30-Ton (27 mt) capacity block with heavy-duty hook; sufficient weight provided for multi-line operation.

Auxiliary Load Block [optional]
5-Ton overhaul ball.

Main and Auxiliary Hoist Specifications
Planetary winch system powered by a high efficiency motor for smooth service: anti-friction bearings, fully automatic, spring applied, hydraulically released safety brake.

Braden Model PD12C, two speed motor.

Maximum single line speed
Bottom Layer           229 FPM (70 m/min.)
Intermediate Layer   280 FPM (85 m/min.)
Top Layer                305 FPM (93 m/niin.)

[High speed option]
Bottom Layer               319 FPM (  97 m/min.)
Intermediate Layer       390 FPM (119 m/min.)
Top Layer                    426 FPM (130 m/min.)

Maximum single line winch pull
Bottom Layer                   10,560 Ibs (4,800 kg)
Intermediate Layer             8,630 Ibs (3,923 kg)
Top Layer                          7,910 Ibs (3,595 kg)

Maximum permissible line pull
9/16 in. (14,3 mm)             7,400 Ibs (3,364 kg)
rotation resistant

9/16 in. (14,3 mm)             8,500 Ibs (3,864 kg)
6 x 25 EIPS IWRC

 

Maximum rope stowage       427 ft. (130 m)
                                               9/16 in. (14,3 mm)

 General information   Standard equipment   Optional equipment   Back to top 

Swing

360º continuous rotation, hydrostatic independent planetary reduction.  Mechanism driven by a pinion gear sealed in a grease bath through a double reduction planetary gear set.  SKF heavy-duty swing bearings.

Maximum speed: 3 RPM

Hydraulic System

Caterpillar hydraulics with hydraulic cross-sensing system:

  Pumps

  100% of engine horsepower deliverable as hydraulic power.

  Full power to a single motor for strong, fast turns Balanced power to two pumps for straight travel.

Combined capacity  97,8 GPM (370 LPM)

 Maximum operating pressure:

      Travel 4,975 psi (350 bar)

      Implements 4,550 psi (320 bar)  

Reservoir     2 x 36 gallon (2x136 liters)

Engine

Caterpillar 3066 TA, 6.4 L six cylinder, quad turbo-charged, after-cooled diesel.
128 hp (96 kW) @ 1800 RPM.

 

Fuel Tank Capacity 82 gallons (310 liters)

Cab

Quiet Caterpillar work station with ergonomic seat design.  Excellent viewing area through large wide windows and a large push-open skylight for upward visibility.  Highly efficient ventilation with automatic climate control.

Valves

Caterpillar 320 Standard 8 bank guide panel.  Strategically located sample ports for oil and pressure checks.

Load Moment Indicator

Robway LMI and anti-two block system, providing an electronic display of boom angle, length, radius, tip height, actual load and rated capacity.  Audible and visual alarms.  Hydraulic control lockout and function cut-off. Data logging.

Undercarriage

Caterpillar designed and built, hydraulically activated, variable gauge frame.  Welded pentagonal track roller frames and hydraulic adjusters.  Sealed and lubricated  rollers and idlers.  Sealed track with triple-grouser shoes.

Crawler Drive System

Hand or foot actuated travel controls.  Fully hydrostatic system.  Each track is driven by one independent, automatic shifting, two-speed axial piston motor via integral planetary final drives.

Maximum Speed

     2.4 MPH (3.86 kph) on site travel, boom retracted.

     1.23 MPH (1.98 kph) pick and carry mode with less than 60 ft. of boom extended.

     0.5 MPH (0.8 kph) pick and carry mode with more than 60 ft. of boom extended.

Maximum Gradeability                30%

Gross Vehicle Weight     68,140 Ibs (30,908 kg)

 

Warranty

6 month warranty with unlimited hours covers parts and labor resulting from defects in material and workmanship.  The global networks of Favelle Favco Cranes and Caterpillar dealers ensure warranty and parts and service support worldwide.  Extended warranty plan is available.
 General information   Standard equipment   Optional equipment   Back to top